5000 watts @ 1 ohm

The post wolfram-audio-aw-5000-1 appeared first on Car Audio Direct.

• Gloss White Heatsink
• White PCB (Circuit board)
• Plexiglass backplate for PCB visibility
• Re-rated board to 9000w RMS

 The Wolfram Audio AW-9000.1 is an ideal single channel powerhouse for the most serious audiophiles. Pairing the intricate circuit design along with custom tooled aluminum heatsinks allows this amplifier to run at maximum efficiency. Linkable at 2 ohm (1 ohm to each amp), the AW-9000.1 allows multiple amps to be synced together perfectly as one.

Specifications:

• • RMS Power @ 1 Ohm : 11,500 Watts x 1 Channel (16.0v)
  • RMS Power @ 1 Ohm : 9,000 Watts x 1 Channel (14.4v)
  • RMS Power @ 2 Ohms : 4,000 Watts x 1 Channels (14.4v)
  • RMS Power @ 4 Ohms : 1,800 Watts x 1 Channels (14.4v)
  • RMS Power @ 2 Ohms (Linked) :  15,000 Watts x 1 Channel (14.4v)
  • Frequency Response : 10hz~350hz (+/-1db)
  • Working Voltage : 10V-16V
  • Signal-to-Noise Ratio (Sensitivity) : >90dB
  • Efficiency @ 4 Ohms : 86%
  • Low Level Input (Gain) : 8V – 200mV
  • Low Pass Filter : 30Hz – 250Hz
  • Bass Boost : 0 ~ 12 dB
  • Subsonic Filter : 10Hz – 60Hz
  • Phase Shift : 0-180 Degrees
  • 4-Way Protection Circuitry Built-in (Thermal, Voltage, Speaker, DC)
  • LED Power, Clip, & Protection Indicators
  • Master / Slave (Strap) : Yes
  • LINK MODE
  • Recommended Fuse Rating : 1,000 Amps
  • Dual 1/0 Gauge Power and Ground Terminal Inputs
  • Remote Level Control Knob Included (Clipping Indicator)
  • Dimensions: 9.5″W x 30.5″L x 3″H

The post wolfram-audio-aw-9000-1 appeared first on Car Audio Direct.

• Gloss White Heatsink
• Plexiglass backplate for PCB visibility
• White PCB (Circuit board)

The Wolfram Audio AW-125.4 is the ideal 4 channel powerhouse for the most serious audiophiles. Pairing the intricate circuit design along with custom tooled aluminum heatsinks allows this amplifier to run at maximum efficiency.

Specifications:

• RMS Power @ 2 Ohms : 175 Watts x 4 Channels (14.4v)
• RMS Power @ 4 Ohms : 125 Watts x 4 Channels (14.4v)
• RMS Power @ 4 Ohms (Bridged) : 330 Watts x 2 (14.4v)
• Frequency Response: 15hz to 35khz
• Low Level Input Adjustment: 0.2v to 8v
• Signal to noise Ratio: >90 dB
• Minimum Impedance: 2 Ohm
• Low Pass Filter: 50hz to 500hz (500hz to 5khz [x10])
• High Pass Filter: 50hz to 500hz (500hz to 5khz [x10])
• T.H.D. Continuous @ 4ohm : 0.05%
• Operating Voltage : 10v ~ 16V
• Fuse Rating : 40A x2
• Dimensions: 16.5″ x 9.75″ x 2.5″

The post wolfram-audio-aw-125-4 appeared first on Car Audio Direct.