Unleash Unprecedented Power and Sonic Excellence: ORION HCCA17000.1DSPLX HCCA Series 17000W RMS 1-Channel Class-D Amplifier redefines the limits of power and sonic excellence in car audio. Designed for audio purists and enthusiasts who demand the pinnacle of performance, this amplifier elevates your audio experience to extraordinary heights.

• – RMS Power @ 4 Ohms @ 0.5% THD+N: 6000W
• – RMS Power @ 2 Ohms @ 0.5% THD+N: 10500W
• – RMS Power @ 1 Ohm @ 0.5% THD+N: 17000W
• – Linked with identical Amplifier
•   RMS Power @ 2 Ohms @ 0.5% THD+N: 35000W
•  POWER TERMINAL MANAGEMENT
•   Positive Terminals: 3 x 0 AWG.
•   Negative Terminals: 3 x 0 AWG.
•   Remote Turn-ON Signal: 10 AWG.
•   Speaker Output Terminals: 4 AWG.

• – Frequency Response: 15Hz – 250Hz
• – Low Pass Crossover: 40Hz – 300Hz
• – Supply Voltage: 9 – 16V
• – Amplifier Efficiency: >88%
• – Damping Factor: 200dB
• – Signal to Noise Ratio: >90dB
• – T.H.D. & Noise: 0.5%
• – Input Impedance: 24K Ohms
• – Phase Shift: 0 – 180
• – Bass Boost: 0-18dB Variable
• – Subsonic Filter: 10 – 40Hz
• – Variable Input Level Control: 0.2V – 6.0V
• – Fuses: 1500A recommended (not included)
• – Dimensions (L x W x H): 37.79″ x 11.89″ x 3.15″ (960x302x80mm)

The post hcca17000-1dsplx-17000w-rms appeared first on Car Audio Direct.

Unleash Monumental Power and Precision: defines the pinnacle of power and precision in car audio. Engineered for audio purists and enthusiasts seeking unparalleled performance, this amplifier redefines your audio experience with unprecedented power and accuracy.

• – RMS Power @ 4 Ohms @ 0.5% THD+N: 4300W
• – RMS Power @ 2 Ohms @ 0.5% THD+N: 7500W
• – RMS Power @ 1 Ohm @ 0.5% THD+N: 12500W
• – Linked with identical Amplifier
•   RMS Power @ 2 Ohms @ 0.5% THD+N: 25400W
•  POWER TERMINAL MANAGEMENT
•   Positive Terminals: 3 x 0 AWG.
•   Negative Terminals: 3 x 0 AWG.
•   Remote Turn-ON Signal: 10 AWG.
•   Speaker Output Terminals: 4 AWG.

• – Frequency Response: 15Hz – 250Hz
• – Low Pass Crossover: 40Hz – 300Hz
• – Supply Voltage: 9 – 16V
• – Amplifier Efficiency: >88%
• – Damping Factor: 200dB
• – Signal to Noise Ratio: >90dB
• – T.H.D. & Noise: 0.5%
• – Input Impedance: 24K Ohms
• – Phase Shift: 0 – 180
• – Bass Boost: 0-18dB Variable
• – Subsonic Filter: 10 – 40Hz
• – Variable Input Level Control: 0.2V – 6.0V
• – Fuses: 1100A recommended (not included)
• – Dimensions (L x W x H): 33.85″ x 11.89″ x 3.15″ (860x302x80mm)

The post hcca12500-1dsplx-125000w-rms appeared first on Car Audio Direct.

Unleash Unrivaled Power and Precision: The  HCCA8000.1DSPLX ORION Amplifier Hcca​ Series 8000W RMS 1-Channel Class-D Amplifier defines the pinnacle of power and precision in car audio. Engineered for audio purists and enthusiasts seeking unparalleled performance, this amplifier redefines your audio experience with unprecedented power and accuracy.

• – RMS Power @ 4 Ohms @ 0.5% THD+N: 2900W
• – RMS Power @ 2 Ohms @ 0.5% THD+N: 5000W
• – RMS Power @ 1 Ohm @ 0.5% THD+N: 8000W
• – Linked with identical Amplifier
•   RMS Power @ 2 Ohms @ 0.5% THD+N: 17000W
•  POWER TERMINAL MANAGEMENT
•   Positive Terminals: 3 x 0 AWG.
•   Negative Terminals: 3 x 0 AWG.
•   Remote Turn-ON Signal: 10 AWG.
•   Speaker Output Terminals: 4 AWG.

• – Frequency Response: 15Hz – 250Hz
• – Low Pass Crossover: 40Hz – 300Hz
• – Supply Voltage: 9 – 16V
• – Amplifier Efficiency: >88%
• – Damping Factor: 200dB
• – Signal to Noise Ratio: >90dB
• – T.H.D. & Noise: 0.5%
• – Input Impedance: 24K Ohms
• – Phase Shift: 0 – 180
• – Bass Boost: 0-18dB Variable
• – Subsonic Filter: 10 – 40Hz
• – Variable Input Level Control: 0.2V – 6.0V
• – Fuses: 750A recommended (not included)
• – Dimensions (L x W x H): 24.02″ x 11.89″ x 3.15″ (610x302x80mm)

The post hcca8000-1dsplx-8000w-rms appeared first on Car Audio Direct.

• – RMS Power @ 4 Ohms @ 0.5% THD+N: 2300W
• – RMS Power @ 2 Ohms @ 0.5% THD+N: 3600W
• – RMS Power @ 1 Ohm @ 0.5% THD+N: 5000W
• – Linked with identical Amplifier
•   RMS Power @ 2 Ohms @ 0.5% THD+N: 11600W
•  POWER TERMINAL MANAGEMENT
•   Positive Terminals: 3 x 0 AWG.
•   Negative Terminals: 3 x 0 AWG.
•   Remote Turn-ON Signal: 10 AWG.
•   Speaker Output Terminals: 4 AWG.

• – Frequency Response: 15Hz – 250Hz
• – Low Pass Crossover: 40Hz – 300Hz
• – Supply Voltage: 9 – 16V
• – Amplifier Efficiency: >88%
• – Damping Factor: 200dB
• – Signal to Noise Ratio: >90dB
• – T.H.D. & Noise: 0.5%
• – Input Impedance: 24K Ohms
• – Phase Shift: 0 – 180
• – Bass Boost: 0-18dB Variable
• – Subsonic Filter: 10 – 40Hz
• – Variable Input Level Control: 0.2V – 6.0V
• – Fuses: 500A recommended (not included)
• – Dimensions (L x W x H): 20.47″ x 11.89″ x 3.15″ (520x302x80mm)

The post hcca5000-1dsplx-5000w-rms appeared first on Car Audio Direct.

Powered by advanced Class D technology, the HCCA3000.1DSPLX runs cooler and more efficiently, pushing your subwoofers to their limits without sacrificing performance. Its robust construction and intelligent protection circuits guard against overheating and overload, ensuring long-lasting, reliable power for your most intense sessions.

• – RMS Power @ 4 Ohms @ 0.5% THD+N: 1350W
• – RMS Power @ 2 Ohms @ 0.5% THD+N: 2100W
• – RMS Power @ 1 Ohm @ 0.5% THD+N: 3000W
• – Linked with identical Amplifier
•   RMS Power @ 2 Ohms @ 0.5% THD+N: 6000W
•  POWER TERMINAL MANAGEMENT
•   Positive Terminals: 3 x 0 AWG.
•   Negative Terminals: 3 x 0 AWG.
•   Remote Turn-ON Signal: 10 AWG.
•   Speaker Output Terminals: 4 AWG.

• – Frequency Response: 10Hz – 300Hz
• – Low Pass Crossover: 40Hz – 300Hz
• – Supply Voltage: 9 – 16V
• – Amplifier Efficiency: >88%
• – Damping Factor: >200dB
• – Signal to Noise Ratio: >90dB
• – T.H.D. & Noise: 0.5%
• – Input Impedance: 24K Ohms
• – Phase Shift: 0 – 180
• – Bass Boost: 0-18dB Variable
• – Subsonic Filter: 10 – 40Hz
• – Variable Input Level Control: 0.2V – 6.0V
• – Fuses: 350A recommended (not included)
• – Dimensions (L x W x H): 18.89″ x 11.89″ x 3.15″ (480x302x80mm)

The post HCCA3000splx-3000w-rms appeared first on Car Audio Direct.

Key Features

• 15000W RMS @ 1Ω
• 7000W RMS @ 2Ω
• 4000W RMS @ 4Ω
• 30000W RMS strapped @ 1Ω
• High-speed MOSFET power supply
• Low-pass filter: 35Hz–250Hz
• Subsonic filter: 10Hz–50Hz
• Phase adjustment: 0°–180°
• Clip limiter for clean, controlled output
• Wired remote with voltage, temperature, and clipping display
• 4-way protection (thermal, high/low voltage, short, DC)
• High-purity copper PCB
• 0-gauge power/ground terminals
• Supports up to 4-gauge speaker wire
• Operating voltage: 12V–15.5V

Dimensions

• 32.28″ × 11.41″ × 2.71″
• 820 mm × 290 mm × 69 mm

Power Advisory

The TEEM FIDEEN KAY is a high-output amplifier that demands a properly designed electrical system for safe and reliable operation. The following specifications are intended to support one or two TEEM FIDEEN KAY amplifiers only. Any additional amplifiers must be accounted for with their own independent alternator and battery capacity.

Minimum Electrical Requirements for One Amplifier (Daily Music Use)

Single Alternator Setup (not ideal):

• One 370A to 400A high-output alternator
• Idle output should be no less than 180A to 220A
• Not recommended for demos or extended high-power sessions
• Battery bank must absorb peak transients and supply current during voltage drop

Dual Alternator Setup (recommended):

• Two 320A to 350A high-output alternators
• Combined output of 600A to 700A at cruising RPM
• Minimum of 400A combined at idle
• External regulation recommended for stable charging between 14.4V and 15.5V

Electrical Requirements for Two Amplifiers (Strapped – 30,000W RMS)

Minimum Charging Solution:

• Three 320A to 350A high-output alternators
• Combined output of 960A to 1050A

Preferred Charging Solution:

• Four high-output alternators rated at 320A or higher
• Total charging capacity of 1200A to 1300A
• Does not include headroom for any additional amplifiers or accessories

Recommended Lithium Battery Bank by System Power

For One Amplifier (15,000W RMS):

• 120Ah to 160Ah total lithium capacity
• Typical configuration: 6S3P to 6S4P (LTO 40Ah) or 4S3P (LiFePO₄)
• Common cell types: Yinlong 66160H.

For Two Amplifiers (30,000W RMS):

• 240Ah to 300Ah total lithium capacity
• Typical configuration: 6S6P to 6S8P (LTO 40Ah) or 4S6P to 4S8P (LiFePO₄)
• Common cell types: Yinlong, C-Max NMC modules, large-format prismatic LiFePO₄

Key Notes

• These specs apply to TEEM FIDEEN KAY amplifiers only
• Any additional amps must be supported by separate alternator and battery upgrades
• Each TEEM amp is fused to handle up to 1120A peak draw
• Power and ground cables must be sized to handle full current safely
• Battery banks must be designed for sustained music playback, not just SPL burps
• Maintain system voltage optimal amplifier and lithium performance.
• Balancers or BMS systems are required to maintain safe and even cell voltage across the entire bank
• All wiring should be professionally routed with proper termination, grounding, and fuse protection

The post DOWN4SOUND TEEMFIDEEN KAY 15000W RMS appeared first on Car Audio Direct.

The post incriminator-audio-ix8-1 appeared first on Car Audio Direct.

The post stetsom-bravo-bass-3k-digital-subwoofer-amplifier-mono-1-channel-class-d-3000-watts-rms appeared first on Car Audio Direct.

TECHNICAL SPECS (1 Ohm):

• Number of Channels: 1
• RMS Power at 1 Ohm 14.4V 5200W
• RMS Power at 2 Ohm 14.4V 2900W
• Supply Voltage: 9V ~ 17V DC
• Frequency Response (-3dB): 5Hz ~ 600Hz (FLAT ON)
• Frequency Response (-3dB): 5Hz ~ 250Hz (FLAT OFF)
• Crossover Low Pass: 30Hz ~ 250Hz
• Crossover Subsonic Filter: 5Hz ~ 40Hz
• Bass boost: 0 ~ +10dB (30Hz ~ 70Hz)
• Signal to Noise: >90 dB
• Input Impedance: 4.8K Ohms
• Musical Consumption: 228A
• BASS Consumption: 456A
• Dimensions (H x W x L): 3.14″ x 9.11″ x 13.11″
• Weight: 9.50lbs

The post stetsom-bravo-bass-5k-digital-subwoofer-amplifier-mono-1-channel-class-d-5000-watts-rms appeared first on Car Audio Direct.

TECHNICAL SPECS (1 Ohm):

• Number of Channels: 1
• RMS Power at 1 Ohm 14.4V 8200W
• RMS Power at 2 Ohm 14.4V 4900W
• Supply Voltage: 9V ~ 17V DC
• Frequency Response (-3dB): 5Hz ~ 600Hz (FLAT ON)
• Frequency Response (-3dB): 5Hz ~ 250Hz (FLAT OFF)
• Crossover Low Pass: 30Hz ~ 250Hz
• Crossover Subsonic Filter: 5Hz ~ 40Hz
• Bass boost: 0 ~ +10dB (30Hz ~ 70Hz)
• Signal to Noise: >90 dB
• Input Impedance: 4.8K Ohms
• Musical Consumption: 365A
• BASS Consumption: 730A
• Dimensions (H x W x L): 3.14″ x 9.11″ x 16.49″
• Weight: 13.22lbs

The post stetsom-bravo-bass-8k-digital-subwoofer-amplifier-mono-1-channel-class-d-8000-watts-rms appeared first on Car Audio Direct.