Whether you’re upgrading your car audio system or building a competition setup, the XV4 delivers massive power handling up to 6000W peak  while maintaining clarity and control. It’s 30mm Xmax ensures deep, punchy bass notes without distortion, even at high output levels.

Built with a strong motor and optimized cone structure, the XV4 offers superior thermal management and consistent performance under pressure. Its 10-inch design fits perfectly into ported enclosures, providing the ideal balance between output and sound quality.

Upgrade your ride with the Sundown XV4 — where craftsmanship meets unmatched sound performance.

Key Features:

• Powerful 3000W RMS / 6000W Peak output

• Advanced X v.4 coil design for improved efficiency

• 10″ subwoofer with deep, accurate bass response

• Optimized for ported enclosures (1.5 cu ft / 32Hz tuning)

• 30mm Xmax for maximum excursion and clean bass

• Heavy-duty motor with 9.25″ diameter

• Durable build for competition-level use

• Dual 1-Ohm and Dual 2-Ohm impedance options

The post Sundown Audio X-Series XV4 10″ 3000W RMS appeared first on Car Audio Direct.

QUICK NOTES:

• RMS Handling: 2700W RMS
• Coil Size: 3 Inch – 8 Layer Flat Aluminum
• Cutout Diameter: 261 mm / 10.28 in
• Mounting Depth: 295 mm / 11.61 in
• Weight: 102.5 lbs (97.66 lbs without packaging)
• Xmax: ~30 mm (one-way)
• Motor Size: 240 mm (9.45 in)
• Extended pole piece for controlled excursion
• Dual flared pole vent for quiet, efficient airflow
• Full vented backplate and motor structure
• Super High Performance 3″ 8-layer flat wire voice coil (bifilar) – 0.3mm anodized ALU former – winding width spec for 3.2″ (81mm) +/- 2mm

PRECISION ENGINEERING:
With a BL rating of 20.507 T·m and precision-machined motor components, the TCX-10 is optimized for thermal management and mechanical control. The 8-layer voice coil provides excellent heat dissipation and reliable performance under high output.

TECHNICAL SPECIFICATIONS:

• Resonance Frequency (Fs): 39.973 Hz
• Sd: 113.411 cm²
• Mms: 430.901 g
• BL: 20.507 T·m
• Qms: 3.586
• Qes: 0.463
• Qts: 0.410
• No (Efficiency): 0.092%
• Sensitivity (SPL): 81.6 dB
• Vas: 6.886 L
• Cms: 36.791 μm/N
• Krm: 41.572 mOhm
• Erm: 0.628
• Kxm: 69.774 mH
• Exm: 0.602

RECOMMENDED ENCLOSURE:

• Ported Box Volume: 1.25 – 1.75 cu ft
• Tuning Frequency: 34 Hz

The post DOWN4SOUND TCX 10″ SUBWOOFER – DVC | 2700W RMS appeared first on Car Audio Direct.

These subwoofers are special order only. They are built to spec by customer.

• Neodymium motor creates Sundown’s highest motor force – as strong as a 2,000 oz. ferrite motor!
• 3,500-watt recommended amplifier power
• Large shorting rings for extremely smooth response
• Megaroll technology for extremely linear cone travel and low-end extension
• Cross-cut pole for lowered distortion, improved thermal control, and higher efficiency
• Heavy-duty cast basket
• Spring-loaded terminals accept up to 4-gauge wire
• Stitched-on heavy-duty tinsel leads
• Solid pole with vent channels and aluminum shorting ring cap
• Top-plate cooling channels

THREE OPTIONS AVAILABLE

MUSIC

• All-around performance
• Patented Sundown frame
• Increased airflow for additional cooling
• Larger, highly linear spider
• Most Throw/X-Max

MUSICAL SPL

• Higher musical output
• U-series frame
• Direct compression cooling
• Higher Efficiency

SPL

• Extreme output (burp)
• U-series frame
• Direct compression cooling
• Custom cone, coil and progressive suspension configurations available.
• Standard 3,500-watt rating. RMS may change with custom configuration.

Lightweight and incredibly powerful, the Compact Neo V.3 is the perfect combination of musicality and sheer, unrelenting motor force. Using Sundown’s patented platform, the Compact features an extended pole piece with a thick shorting ring, plus a custom cross-cut pole piece with a Neodymium cap for increased output and thermal control. The solid, high-velocity pole piece uses CNC cross-cut channel cooling, a series of 16 direct air-gap vents in the back plate to keep the motor even cooler, and a vented top plate/gap.

 Please contact for pricing and shipping details.  Custom orders do take time to process, allow 2-3 business weeks for delivery.

The post sundown-audio-compact-neo-v3-subwoofer-special-order appeared first on Car Audio Direct.

RMS 1250 watts
Dual 2 or 4 ohm voice coils
Specifications
RE (Ohms) 3.4 6.06
FS (Hz) 36 36
VAS (L) 10.286 8.497
Qes 0.501 0.509
Qms 2.341 2.445
Qts 0.413 0.421
Le (mH) 3.517 4.456
BL (NA) 22.267 31.742
Mms (Grams) 304.447 337.651
Cms (uM/N) 57.024 47.126
Sens (dB @ 1w/1m) 82.5 82.1
Xmax 22mm 22mm
T/S SPECS SAV3 10″ D2 SAV3 10″ D4
Enclosure Specifications
Sealed Enclosure 0.5 cu ft
Ported Enclosure 1.0 cu ft
Recommended Tuning 35Hz
Recommended Port Area 15 sq in
Displacement .17 cu ft
Depth 6.92″
Outside Diameter 11″
Cut-Out 9.5″
Physical Dimensions Download

The post Sundown Audio SA-Series v.3 10″ Subwoofer appeared first on Car Audio Direct.

Elevate your car audio system with the DOWN4SOUND SB 10” Subwoofer, designed to bring precise, deep bass and exceptional clarity to your setup. With a dual 2-ohm voice coil configuration and 500W RMS power handling, this subwoofer delivers a perfect balance of performance and durability for your audio needs.

QUICK NOTES:
RMS Handling: 500W RMS
Coil Size: 2.5 Inch
Cutout Diameter: 9.06 inches / 230 mm
Outer Diameter: 10.28 inches / 261 mm
Mounting Depth: 6.46 inches / 164 mm
Motor Height: 3.54 inches / 90 mm
Net Weight: 41.9 lbs / 19 kg
Gross Weight: 45.2 lbs / 20.5 kg
Highly optimized suspension for accurate sound reproduction
Compact yet powerful for high-performance setups
Technical Specifications:
Revc (DC Resistance): 2.03 Ohm
Resonance Frequency (Fs): 30.88 Hz
BL Product: 19.38 T·m
Total Moving Mass (Mms): 171.79 g
Suspension Compliance (Cms): 151.45 μm/N
Effective Piston Area (Sd): 506.71 cm²
Equivalent Volume (Vas): 24.35 L
Sensitivity (SPL): 83.0 dB
Qms (Mechanical Q): 3.474
Qes (Electrical Q): 0.555
Qts (Total Q): 0.479
Recommended Enclosures:
Ported Enclosure Size: 1.0 cu ft (net)
Port Area: 15 sq in
Port Tuning: 35 Hz
Sealed Enclosure: Not Recommended

The post DOWN4SOUND SB 10″ SUBWOOFER – DVC | 500W RMS appeared first on Car Audio Direct.

QUICK NOTES:

• RMS OUTPUT: 1300W RMS
• COIL SIZE: 2.75 INCH
• CUTOUT: 9.45 inches (240 mm)
• MOUNTING DEPTH: 7.36 inches (187 mm)
• NET WEIGHT: 31.7 lbs (14.4 kg)
• GROSS WEIGHT: 35.3 lbs (16 kg)
• XMAX : 28 mm (one-way)

Precision Engineering: Engineered with an optimized motor strength (BL Product: 27.077 T·m) and an effective piston area (Sd) of 56.305 cm² for powerful sound output at an affordable price.

Technical Specifications:

• Revc (DC Resistance): 2.960 Ohm
• Resonance Frequency (Fo): 40.881 Hz
• Total Moving Mass (Mms): 322.255 g
• Suspension Compliance (Cms): 46.472 μm/N
• Equivalent Volume (Vas): 8.642 L
• Sensitivity (SPL): 83.0 dB
• Qms (Mechanical Q): 2.303
• Qes (Electrical Q): 0.455
• Qts (Total Q): 0.380
• Voice Coil Inductance (Le): Not specified
• Mechanical Resistance (Rms): 0.782
• Sealed Enclosure: .5 cubic foot
• Ported Enclosure: 1.0 cubic feet

The post DOWN4SOUND DBz 10″ SUBWOOFER – DVC | 1300W RMS appeared first on Car Audio Direct.

• Features

  • Xmax = 11mm one-way by 70% BL
  • Xmech is a hard limit of 25mm one-way for 12s and 20mm one-way for 10s
  • RMS Power = 500-watts
  • Black Aluminum 2.5” voice coil former for superior heat dissipation
  • High Temperature 4-Layer copper voice coil wire
  • Stitched-On “Mini-XL” Tinsel Leads to prevent fatigue and failure
  • Vented Pole-Piece and Multi-Vented Magnetic Gap
  • Dual-Magnet Design for appropriate motor force factor and mid QTS
  • Custom tooled cone shape for reduced mechanical noise over high excursion
  • Bolt-through motor design to ensure maximum longevity and ruggedness against mechanical failures
    ** This motor is bolted through the top so the bolts are not visible from the back like several other models.
  • Magnet ID shorting ring

The post Sundown Audio SML10D 10″ shallow sub appeared first on Car Audio Direct.

A double stacked magnet structure and an extremely long voice coil allow us to achieve a class-leading linear x-max of 14mm one-way in addition to high mechanical clearances (over 2” peak-to-peak). The large coil combined with gap venting, chamfered pole-piece design, and optimized pole vent give the LCS Series impressive thermal performance. Mechanical stability and durability are addressed via the strong paper cone, rugged foam surround, and a high quality spider with fully tied-on tinsel leads. All major areas of woofer durability have been addressed to the maximum level possible in this category.

Bottom-line; if you are looking for a great subwoofer option and you have a tight budget the Sundown LCS Series woofers are for you. These woofers have absolutely no frills – simply raw performance for the dollar.

• Features

  • Xmax = 14mm one-way by 70% BL
  • RMS Power = 300-watts
  • Vented magnetic gap
  • Vented Pole piece with chamfered edges for increased air powered voice coil cooling
  • Custom tooled & vented, extra thick stamped steel frame
  • Black Aluminum 2” voice coil former for superior heat dissipation
  • High Temperature 4-Layer copper voice coil wire
  • High Quality Push Terminals
  • Stitched-On Flat Tinsel Leads to prevent fatigue and failure
  • Optimized for small, ported enclosures

The post lcs10-v-2-series-300w-dvc-subwoofer appeared first on Car Audio Direct.

SPECS

RMS:500

Voice Coil: 2.5″

Motor:100 Oz

SPL: 84.5 db

FMS: 31.4 Hz

BL: 25.6

RES: 82.2

RE: 8.0

QMS: 4.38

QES: 0.40

QTS: 0.36

CMS: 0.16 mm/N

MMS: 164.6 gr

Nref: 0.18%

BT: 25.6

VAS: 23.8 L

RP: 90.6

LP: 116.5 mH

CP: 300.8 uF

Le: 3.66 mH

Xmax: 16

• BOX HEALTHY RECOMENDATIONEvery vehicles applications, equipment, tuning, wiring, ext all play a factor in making sure your woofers are playing clean signals to avoid any clipping. Our products have the reputation of taking some of the most abuse in the industry for its given power rating, but to ensure the longevity using the right air space and scoping for a clean signal will be sure to have a lasting daily resilient subwoofer. Suggested Healthy spec range.Rule of thumb lean towards smaller enclousre if clamping @ or more than conservative power. Lean towards bigger enclosure clamping below conservative power

   

  Ported enclosure

  .75ft-1.25ft tuned @35hertz with 12-16sqaure inch of port area per cubic foot. 

   

  MOUNTING DEPTH 5.75″ | CUTOUT 9.17″

The post resilient-sounds-rs10 appeared first on Car Audio Direct.